Update dependency @tabler/icons to v2.47.0

content/blog/replicating-truenas-datasets-to-sftpgo-over-tailscale/index.md

@@ -21,8 +21,10 @@ The only app I've needed to install has been Tailscale which has enabled me to a
 
 More recently, to reduce cloud costs, I've setup some a small node at another physical location and installed both Tailscale and [sftpgo](https://github.com/drakkan/sftpgo) on it to facilitate offsite backups. After setting up the infrastructure and adding a Cloud Sync Task in TrueNAS SCALE to replicate these backups offsite to sftpgo, I noticed that Tailscale's Magic DNS was not working, nor was the Tailscale IPv4 address.
 
-After reading the [Tailscale docs](https://tailscale.com/kb/1483/truenas#route-non-tailnet-traffic-through-truenas) , it became clear that the **Userspace** box had to be unchecked in the Tailscale app settings. This is because the Tailscale app is running within a docker container on the TrueNAS SCALE VM. After unchecking the **Userspace** box, I was able to verify that the Backup Credentials created for sftpgo worked when specifying the host as a Tailscale IPv4 address. This was probably good enough since the IP won't change unless the node is re-registered, but I figured setting up MagicDNS would make the setup more portable.
+After reading the [Tailscale docs](https://tailscale.com/kb/1483/truenas#route-non-tailnet-traffic-through-truenas) , it became clear that the **Userspace** box had to be unchecked in the Tailscale app settings. This is because the Tailscale app is running within a docker container on the TrueNAS SCALE VM. After unchecking the **Userspace** box, I was able to verify that the Backup Credentials created for sftpgo worked when specifying the host as a Tailscale IPv4 address. This was probably good enough since the IP won't change unless the node is re-registered.
 
-To get MagicDNS working, I went to Network > Global Configuration and set "Nameserver 1" to **100.100.100.100**. After this, I was able to specify the FQDN in the Backup Credentials and the Cloud Sync Tasks started.
+~~To get MagicDNS working, I went to Network > Global Configuration and set "Nameserver 1" to **100.100.100.100**. After this, I was able to specify the FQDN in the Backup Credentials and the Cloud Sync Tasks started.~~ 
+
+This method of adding MagicDNS can lead to issues with DNS when updating the tailscale application in TrueNAS, so I ended using the Tailscale IP directly.
 
 

package-lock.json

@@ -1394,9 +1394,10 @@
       }
     },
     "node_modules/@tabler/icons": {
-      "version": "2.45.0",
-      "resolved": "https://registry.npmjs.org/@tabler/icons/-/icons-2.45.0.tgz",
-      "integrity": "sha512-J10UDghOni9wlrj5CpKAzychDCABCKYq897mGg0wGFsd+tYLaUdz0dt/HZeGnV8gZJo0hIiTPLGwBp5EW42Qsg==",
+      "version": "2.47.0",
+      "resolved": "https://registry.npmjs.org/@tabler/icons/-/icons-2.47.0.tgz",
+      "integrity": "sha512-4w5evLh+7FUUiA1GucvGj2ReX2TvOjEr4ejXdwL/bsjoSkof6r1gQmzqI+VHrE2CpJpB3al7bCTulOkFa/RcyA==",
+      "license": "MIT",
       "funding": {
         "type": "github",
         "url": "https://github.com/sponsors/codecalm"

themes/custom-theme/package-lock.json

@@ -1368,9 +1368,9 @@
       }
     },
     "node_modules/@tabler/icons": {
-      "version": "2.44.0",
-      "resolved": "https://registry.npmjs.org/@tabler/icons/-/icons-2.44.0.tgz",
-      "integrity": "sha512-WPPtihDcAwEm1QZM9MXQw6+r/R2/qx7KMU1eegsi9DsqBLAb0W2kbt6e/syvd6j9c+6XNpRVBW1ziGqSWQAWOg==",
+      "version": "2.47.0",
+      "resolved": "https://registry.npmjs.org/@tabler/icons/-/icons-2.47.0.tgz",
+      "integrity": "sha512-4w5evLh+7FUUiA1GucvGj2ReX2TvOjEr4ejXdwL/bsjoSkof6r1gQmzqI+VHrE2CpJpB3al7bCTulOkFa/RcyA==",
       "funding": {
         "type": "github",
         "url": "https://github.com/sponsors/codecalm"
@@ -7569,9 +7569,9 @@
       "dev": true
     },
     "@tabler/icons": {
-      "version": "2.44.0",
-      "resolved": "https://registry.npmjs.org/@tabler/icons/-/icons-2.44.0.tgz",
-      "integrity": "sha512-WPPtihDcAwEm1QZM9MXQw6+r/R2/qx7KMU1eegsi9DsqBLAb0W2kbt6e/syvd6j9c+6XNpRVBW1ziGqSWQAWOg=="
+      "version": "2.47.0",
+      "resolved": "https://registry.npmjs.org/@tabler/icons/-/icons-2.47.0.tgz",
+      "integrity": "sha512-4w5evLh+7FUUiA1GucvGj2ReX2TvOjEr4ejXdwL/bsjoSkof6r1gQmzqI+VHrE2CpJpB3al7bCTulOkFa/RcyA=="
     },
     "@trysound/sax": {
       "version": "0.2.0",