Update dependency @tabler/icons to v2.47.0

.gitignore

@@ -119,5 +119,3 @@ dist
 # End of https://www.toptal.com/developers/gitignore/api/hugo,node
 
 public/
-
-.obsidian/

content/blog/replicating-truenas-datasets-to-sftpgo-over-tailscale/index.md

@@ -21,10 +21,8 @@ The only app I've needed to install has been Tailscale which has enabled me to a
 
 More recently, to reduce cloud costs, I've setup some a small node at another physical location and installed both Tailscale and [sftpgo](https://github.com/drakkan/sftpgo) on it to facilitate offsite backups. After setting up the infrastructure and adding a Cloud Sync Task in TrueNAS SCALE to replicate these backups offsite to sftpgo, I noticed that Tailscale's Magic DNS was not working, nor was the Tailscale IPv4 address.
 
-After reading the [Tailscale docs](https://tailscale.com/kb/1483/truenas#route-non-tailnet-traffic-through-truenas) , it became clear that the **Userspace** box had to be unchecked in the Tailscale app settings. This is because the Tailscale app is running within a docker container on the TrueNAS SCALE VM. After unchecking the **Userspace** box, I was able to verify that the Backup Credentials created for sftpgo worked when specifying the host as a Tailscale IPv4 address. This was probably good enough since the IP won't change unless the node is re-registered.
+After reading the [Tailscale docs](https://tailscale.com/kb/1483/truenas#route-non-tailnet-traffic-through-truenas) , it became clear that the **Userspace** box had to be unchecked in the Tailscale app settings. This is because the Tailscale app is running within a docker container on the TrueNAS SCALE VM. After unchecking the **Userspace** box, I was able to verify that the Backup Credentials created for sftpgo worked when specifying the host as a Tailscale IPv4 address. This was probably good enough since the IP won't change unless the node is re-registered, but I figured setting up MagicDNS would make the setup more portable.
 
-~~To get MagicDNS working, I went to Network > Global Configuration and set "Nameserver 1" to **100.100.100.100**. After this, I was able to specify the FQDN in the Backup Credentials and the Cloud Sync Tasks started.~~ 
+To get MagicDNS working, I went to Network > Global Configuration and set "Nameserver 1" to **100.100.100.100**. After this, I was able to specify the FQDN in the Backup Credentials and the Cloud Sync Tasks started.
-
-This method of adding MagicDNS can lead to issues with DNS when updating the tailscale application in TrueNAS, so I ended using the Tailscale IP directly.
 
 

content/blog/using-a-realtek-nic-with-opnsense/index.md

@@ -19,7 +19,7 @@ tags:
 
 For the past few years, I've been running pfSense (and more recently OPNsense) in a virtual machine within Proxmox. This has been running fine with a single onboard Intel NIC. A few months ago, I upgraded to a machine that has a CPU that supports hardware-accelerated transcoding, has more SATA ports, and has more PCI slots for future expansion. With the goal of having a dedicated NIC for WAN, I bought an inexpensive 1Gbps PCIe NIC (TG-3468) despite reading about some of the concerns around Realtek NICs (sluggish performance, driver instability, and in some cases system crashes).
 
-I've been running a Realtek NICs reliably on Linux and Windows desktops, so I figured I could make it work without too much effort, but it turns out Realtek NICs really can be problematic when it comes to FreeBSD-based routers, and commonly documented workarounds did not solve my problems.
+I've been running a Realtek NICs reliably on Linux and Windows desktops, so I figured I could make it work without too much effort, but it turns out Realtek NICs really can be problematic when it comes to FreeBSD-based routers, and some commonly documented workarounds did not solve my problems.
 
 <!--more-->
 
@@ -28,7 +28,7 @@ I've been running a Realtek NICs reliably on Linux and Windows desktops, so I fi
 My environment consists of:
 
 - Proxmox 8.4
-- OPNsense 25.1 (QEMU VM)
+- OPNsense 25.1 (Virtual Machine)
 - Ethernet controller: Intel Corporation Ethernet Connection (5) I219-LM
 - Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
 
@@ -51,7 +51,7 @@ For maximum performance and reduced hypervisor overhead, passing through a physi
 
 I added the PCI device and restarted the OPNsense VM and re-configured the WAN in OPNsense to use this device.
 
-I received the WAN IP and everything appeared to be working. I ran a few speed tests and noticed that the download speeds were much lower than normal from all of my devices. I checked my instance of [speedtest-tracker](https://docs.speedtest-tracker.dev) noticed that the download speeds were significantly slower than historical records:
+I received the WAN IP and everything appeared to be working. I ran a few speed tests and noticed that the download speeds were a lot lower than normal on multiple devices. I checked my instance of [speedtest-tracker](https://docs.speedtest-tracker.dev) noticed that the download speeds were significantly slower than historical records:
 
 ![speedtest-tracker](./speedtest-tracker.png)
 

package-lock.json

@@ -335,7 +335,6 @@
         }
       ],
       "license": "MIT",
-      "peer": true,
       "engines": {
         "node": "^14 || ^16 || >=18"
       },
@@ -359,7 +358,6 @@
         }
       ],
       "license": "MIT",
-      "peer": true,
       "engines": {
         "node": "^14 || ^16 || >=18"
       }
@@ -1425,7 +1423,6 @@
       "resolved": "https://registry.npmjs.org/acorn/-/acorn-8.11.3.tgz",
       "integrity": "sha512-Y9rRfJG5jcKOE0CLisYbojUjIrIEE7AGMzA/Sm4BslANhbS+cDMpgBdcPT91oJ7OuJ9hYJBx59RjbhxVnrF8Xg==",
       "dev": true,
-      "peer": true,
       "bin": {
         "acorn": "bin/acorn"
       },
@@ -1645,7 +1642,6 @@
           "url": "https://github.com/sponsors/ai"
         }
       ],
-      "peer": true,
       "dependencies": {
         "caniuse-lite": "^1.0.30001565",
         "electron-to-chromium": "^1.4.601",
@@ -2416,7 +2412,6 @@
       "resolved": "https://registry.npmjs.org/eslint/-/eslint-8.56.0.tgz",
       "integrity": "sha512-Go19xM6T9puCOWntie1/P997aXxFsOi37JIHRWI514Hc6ZnaHGKY9xFhrU65RT6CcBEzZoGG1e6Nq+DT04ZtZQ==",
       "dev": true,
-      "peer": true,
       "dependencies": {
         "@eslint-community/eslint-utils": "^4.2.0",
         "@eslint-community/regexpp": "^4.6.1",
@@ -2472,7 +2467,6 @@
       "resolved": "https://registry.npmjs.org/eslint-config-prettier/-/eslint-config-prettier-9.1.0.tgz",
       "integrity": "sha512-NSWl5BFQWEPi1j4TjVNItzYV7dZXZ+wP6I6ZhrBGpChQhZRUaElihE9uRRkcbRnNb76UMKDF3r+WTmNcGPKsqw==",
       "dev": true,
-      "peer": true,
       "bin": {
         "eslint-config-prettier": "bin/cli.js"
       },
@@ -4138,7 +4132,6 @@
         }
       ],
       "license": "MIT",
-      "peer": true,
       "dependencies": {
         "nanoid": "^3.3.8",
         "picocolors": "^1.1.1",
@@ -5313,7 +5306,6 @@
       "resolved": "https://registry.npmjs.org/postcss-selector-parser/-/postcss-selector-parser-6.0.15.tgz",
       "integrity": "sha512-rEYkQOMUCEMhsKbK66tbEU9QVIxbhN18YiniAwA7XQYTVBqrBy+P2p5JcdqsHgKM2zWylp8d7J6eszocfds5Sw==",
       "dev": true,
-      "peer": true,
       "dependencies": {
         "cssesc": "^3.0.0",
         "util-deprecate": "^1.0.2"
@@ -5403,7 +5395,6 @@
       "resolved": "https://registry.npmjs.org/prettier/-/prettier-3.1.1.tgz",
       "integrity": "sha512-22UbSzg8luF4UuZtzgiUOfcGM8s4tjBv6dJRT7j275NXsy2jb4aJa4NNveul5x4eqlF1wuhuR2RElK71RvmVaw==",
       "dev": true,
-      "peer": true,
       "bin": {
         "prettier": "bin/prettier.cjs"
       },

themes/custom-theme/layouts/robots.txt

@@ -0,0 +1,53 @@
+# Dark Visitors robots.txt
+
+# AI Data Scraper
+# https://darkvisitors.com/agents/anthropic-ai
+
+User-agent: anthropic-ai
+Disallow: /
+
+# AI Data Scraper
+# https://darkvisitors.com/agents/ccbot
+
+User-agent: CCBot
+Disallow: /
+
+# AI Data Scraper
+# https://darkvisitors.com/agents/facebookbot
+
+User-agent: FacebookBot
+Disallow: /
+
+# AI Data Scraper
+# https://darkvisitors.com/agents/google-extended
+
+User-agent: Google-Extended
+Disallow: /
+
+# AI Data Scraper
+# https://darkvisitors.com/agents/gptbot
+
+User-agent: GPTBot
+Disallow: /
+
+# AI Data Scraper
+# https://darkvisitors.com/agents/omgilibot
+
+User-agent: omgilibot
+Disallow: /
+
+User-agent: omgili
+Disallow: /
+
+# This blocks Bytespider
+https://darkvisitors.com/agents/bytespider
+User-agent: Bytespider
+Disallow: /
+
+User-agent: *
+{{ if eq (hugo.Environment) "production" -}}
+Allow: /
+{{ else -}}
+Disallow: /
+{{ end -}}
+Sitemap: {{ "sitemap.xml" | absURL -}}